Leonard LV1515 Bedienungsanleitung Seite 28

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 52
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 27
PROGRAMMES
Programme
1)
Degree of soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
85 - 95 1.8 - 2.0 22 - 25
Normal soil
Crockery and cut-
lery
Prewash
Wash 65 °C
Rinses
Dry
100 - 110 1.4 - 1.6 19 - 21
2)
Fresh soil
Crockery and cut-
lery
Wash 65 °C
Rinse
30 0.9 9
3)
Normal soil
Crockery and cut-
lery
Prewash
Wash 50 °C
Rinses
Dry
130 - 140 1.0 - 1.2 14 - 16
4)
All Prewash 12 0.1 5
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
OPTIONS
Acoustic signals
The acoustic signals operate in these con-
ditions:
When the programme is completed.
A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic sig-
nals.
Deactivating the acoustic signals
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
3. Press and hold the programme button
until the programme indicator (A) flashes
and the programme indicator (B) comes
on.
4. Press immediately the programme but-
ton.
The programme indicator (A) comes
on with a fixed light.
The programme indicator (B) starts to
flash.
5. Wait until the programme indicator (A)
goes off and the end indicator comes
on (the programme indicator (B) contin-
ues to flash).
The acoustic signals are on.
6. Press the programme button. The end
indicator goes off.
The acoustic signals are off.
7. Deactivate the appliance to confirm the
setting.
28 leonard
Seitenansicht 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare